Number
GCSE Maths · AQA 8300 – Number · Edexcel 1MA1 – Number
Place value, ordering and rounding
Every digit's value depends on its column: thousands, hundreds, tens, units, tenths, hundredths…
- To order decimals, line up the decimal points and compare column by column (0.35 > 0.305).
- Decimal places (d.p.): count digits after the point. 3.476 to 2 d.p. = 3.48.
- Significant figures (s.f.): start counting from the first non-zero digit. 0.004 572 to 2 s.f. = 0.0046; 48 620 to 2 s.f. = 49 000.
- Look at the next digit: 5 or more rounds up, 4 or less rounds down.
- Estimating: round every number to 1 s.f., then calculate. 31.2 × 4.87 ≈ 30 × 5 = 150.
Common mistake: Writing 48 620 to 2 s.f. as "49" – keep the place value with zeros.
Negative numbers and order of operations
- BIDMAS: Brackets, Indices, Division and Multiplication (left to right), Addition and Subtraction (left to right).
3 + 4 × 2² = 3 + 4 × 4 = 19
- Two signs the same → positive; different → negative. (−3) × (−4) = 12, 12 ÷ (−3) = −4.
- Subtracting a negative is adding: 5 − (−2) = 7.
Factors, multiples and primes
- Factor: divides exactly into a number. Multiple: in its times table. Prime: exactly two factors (1 and itself). 1 is not prime.
- Prime factor decomposition: use a factor tree. 360 = 2³ × 3² × 5.
- HCF (highest common factor): multiply the primes the numbers share. LCM (lowest common multiple): multiply the highest power of every prime that appears.
60 = 2² × 3 × 5 and 72 = 2³ × 3² → HCF = 2² × 3 = 12, LCM = 2³ × 3² × 5 = 360
Exam tip: A Venn diagram of the two prime factor lists makes HCF (middle) and LCM (everything) quick.
Fractions
- Simplify: divide top and bottom by the HCF.
- Add/subtract: use a common denominator. 2/3 + 1/4 = 8/12 + 3/12 = 11/12.
- Multiply: top × top, bottom × bottom. Divide: flip the second fraction and multiply (KFC: keep, flip, change).
- Turn mixed numbers into improper fractions first: 2⅓ = 7/3.
- Fraction of an amount: divide by the bottom, multiply by the top. 3/5 of 40 = 24.
Fractions, decimals and percentages
- Percentage = out of 100: 35% = 0.35 = 7/20.
- Fraction → decimal: divide top by bottom. Decimal → percentage: × 100.
- Recurring decimals: a dot shows repeating digits; 1/3 = 0.333…
- Fractions with denominators made only of 2s and 5s give terminating decimals.
Converting recurring decimals to fractionsHigher only
Let x = 0.272727… → 100x = 27.2727… → 99x = 27 → x = 27/99 = 3/11
Exam tip: Multiply by 10ⁿ where n is the length of the repeating block, then subtract to cancel the recurring part.
Percentages
- Percentage of an amount: 15% of 80 = 0.15 × 80 = 12.
- Percentage change = change ÷ original × 100.
- Multipliers: increase by 12% → × 1.12; decrease by 12% → × 0.88.
- Reverse percentages: after a 20% rise, price is £96. Original = 96 ÷ 1.2 = £80.
- Compound interest / depreciation: amount = original × multiplierⁿ.
£2000 at 3% for 5 years = 2000 × 1.03⁵ = £2318.55
Common mistake: Reverse percentages: never take 20% of the new value off – divide by the multiplier.
Indices
aᵐ × aⁿ = aᵐ⁺ⁿ · aᵐ ÷ aⁿ = aᵐ⁻ⁿ · (aᵐ)ⁿ = aᵐⁿ · a⁰ = 1
- Negative powers mean "1 over": 2⁻³ = 1/8.
- Fractional powers: a^(1/n) = ⁿ√a and a^(m/n) = (ⁿ√a)ᵐ. 8^(2/3) = (∛8)² = 4.Higher only
- (2/3)⁻² = (3/2)² = 9/4.
Standard form
- A × 10ⁿ where 1 ≤ A < 10 and n is an integer. 45 000 = 4.5 × 10⁴; 0.0062 = 6.2 × 10⁻³.
- Multiply: multiply the numbers, add the powers. Divide: divide the numbers, subtract the powers.
- Always re-adjust so A is between 1 and 10: 15 × 10³ = 1.5 × 10⁴.
- Add or subtract by converting to ordinary numbers (or matching powers) first.
SurdsHigher only
- A surd is a root that can't be simplified to a whole number, e.g. √2.
√ab = √a × √b · √12 = √4 × √3 = 2√3
- Collect like surds: 3√5 + 2√5 = 5√5.
- Expand brackets as normal: (2 + √3)(1 − √3) = 2 − 2√3 + √3 − 3 = −1 − √3.
- Rationalise the denominator: 6/√3 = 6√3/3 = 2√3. For 1/(2 + √3), multiply top and bottom by (2 − √3).
Bounds and error intervals
- A length of 12 cm to the nearest cm lies in 11.5 ≤ x < 12.5 (half a unit either side).
- Truncated values: 4.7 truncated to 1 d.p. means 4.7 ≤ x < 4.8.
- Calculations with bounds: maximum of a + b = upper + upper; maximum of a − b = upper − lower; maximum of a ÷ b = upper ÷ lower.Higher only
Exam tip: For the most accurate answer, round both bounds and give the value they agree to.
Calculator skills and counting
- Use brackets and the fraction key; write down the full display before rounding.
- Product rule for counting: 3 starters and 4 mains give 3 × 4 = 12 meal choices.
Key terms and facts
- Prime number
- Has exactly two factors: 1 and itself
- Is 1 a prime number?
- No – it has only one factor
- Factor
- A number that divides exactly into another
- Multiple
- A number in another number's times table
- HCF
- Highest common factor – biggest number that divides both
- LCM
- Lowest common multiple – smallest number both divide into
- Reciprocal of 5?
- 1/5
- a⁰ = ?
- 1
- a⁻² = ?
- 1 / a²
- a^(1/2) = ?
- √a
- aᵐ × aⁿ = ?
- aᵐ⁺ⁿ
- aᵐ ÷ aⁿ = ?
- aᵐ⁻ⁿ
- (aᵐ)ⁿ = ?
- aᵐⁿ
- Standard form
- A × 10ⁿ, where 1 ≤ A < 10
- 4 500 000 in standard form?
- 4.5 × 10⁶
- 0.0032 in standard form?
- 3.2 × 10⁻³
- Round 3.4567 to 2 decimal places?
- 3.46
- Round 0.04083 to 2 significant figures?
- 0.041
- Upper bound of 7 cm (to nearest cm)?
- 7.5 cm
- Rational number
- Can be written as a fraction a/b
- Surd
- A root that can't be simplified to a whole number, e.g. √2
- √12 simplified?
- 2√3
- Rationalise 1/√2?
- √2 / 2
- 0.333... as a fraction?
- 1/3
- Product rule for counting
- Ways for A then B = (ways for A) × (ways for B)